Focal Alpha 50 EVO Studio Monitor 5″13cm 2-Way 60W
Focal Alpha 50 EVO Studio Monitor 5″13cm 2-Way 60W
Couldn't load pickup availability
ACTIVE 2-WAY STUDIO MONITOR
Alpha 50 Evo has a 1” (25mm) aluminium tweeter and a 5” (13 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France. This monitor stands out for its dynamics, its neutrality of tonal balance and its excellent sonic coherence, guaranteed wherever you are listening.
Its features include a 1/4″ (6.35mm) TRS jack input in addition to the XLR and RCA analogue inputs. There is also a disengageable automatic stand-by mode as well as inserts for wall and ceiling fastening.
The high current capacity offered by its 2 amplifiers supports total control of the signal dynamics. This also allows high volumes to be reached without distortion.
The bass-reflex design, rounded edges and modern, robust side panels are another big plus for the Alpha 50 Evo, all contributing to acoustical integration and optimum aesthetics in any location.
KEY POINTS
- Excellent dynamics
- Wide dispersion, even sound retained throughout the room
- 5”(13 cm) Slatefiber cone woofer
- Large laminar vent
- Identical tonal balance at both low and high volume
- Detailed mixes
- Connect up to 3 audio sources
- Inserts for wall and ceiling fastening
- Automatic disengageable stand-by
- Protection grilles included
| Brand | |
|---|---|
| Series |
Focal Alpha EVO Series |
| Speaker Type (Pro) |
2-Way, 5"(13cm) Bass Driver, RCA Input, TRS Input, XLR Input, Active |
Technical Specifications: |
|
| Type: | 2-way Studio Monitor |
| Drivers: |
Woofer: 5″ (13cm) Slatefiber cone Tweeter: 25mm (1″) with aluminium inverted dome |
| Frequency response (+/- 3dB): | 45Hz – 22kHz |
|
Maximum SPL: |
101dB SPL (peak @ 1m) |
|
Inputs Connectors: |
TRS: symmetrical 10kOhms XLR: symmetrical 10kOhms RCA: asymmetrical 10kOhms with compensated sensitivity |
| Medium and low frequency amplifier: | 35W |
| High frequency amplifier: | 25W |
| Sensitivity: | Adjustable, 0 or +6dB |
| Level midrange/bass (0 – 250Hz): | Adjustable, +/-6dB |
| Treble level (4.5 – 35kHz): | Adjustable, +/-3dB |
| Power on/of: | On/off switch on the rear panel |
| Automatic stand-by mode: | After around 15 minutes of no use By signal detection >6mV |
| Power supply: | 100 – 240V~ (T2AL fuse/250V) |
| Connection: | IEC socket and detachable power cable |
| Stand-by consumption: | <0.5W |
| Views and controls: | On and off LED – Stand-by LED |
| Construction: | 0.6″ (15mm) MDF |
| Finish: | Black vinyl and paint |
| Dimensions with 4 rubber feet (HxWxD): | 310 x 228 x 239mm |
| Weight: | 5.95kg |
